Cobra 45 WX Handheld Extra Channels:
- Remove the battery pack and the antenna.
- Remove the screws from the back of the radio and from
the wrist strap.
- Remove the screws from where the battery is
connected. NOTE: There is a spring loaded tab by the battery
connector.
- Remove the tab and spring.
- Hold the backside of the radio and pull the front off.
- Locate the area on the PC board where you are going to
make the mods.
- After the jumper is made you will net to reset the
radio.
- Put the radio back together.
You will now how 40 uppers and 40 lowers.